The syslog-ng OSE application can convert the syslog messages sent by Cisco devices to Cisco-specific SNMP traps defined by the CISCO-SYSLOG-MIB (enterprises.cisco.ciscoMgmt.ciscoCiscoMIB) is also supported (such traps are also referred to as clogMessageGenerated notifications). That way, the incoming log messages can be forwarded to devices used to process and analyze Cisco-specific SNMP traps.

For this to work correctly, the following requirements must be met:

To accomplish this, syslog-ng OSE has to use a special pattern database to parse the Cisco-specific syslog messages, because these messages do not comply with the standard syslog formats.

For details on the Cisco-specific SNMP trap format, see CISCO-SYSLOG-MIB on the Cisco website.

Parsing Cisco-specific message fields with patterndb

The PROGRAM part of the syslog messages sent by Cisco devices contain not only the program name, but other important protocol information part as well. The PROGRAM of these messages contains the Facility, Severity, and the Mnemonic (the Cisco name) of the message. The following pattern database parses these values and makes them available as the .cisco.Facility, .cisco.Severity, and .cisco.MsgName, respectively. The actual log message is available as .cisco.MsgText.

<patterndb version="4" pub_date="2011-05-03">
    <ruleset name="cisco snmp ruleset1" xml:id="480de478-d4a6-4a7f-bea4-0c0245d361e3">
        <description>Pattern for Cisco messages having BSD timestamps, for example: Jul 01 2010 00:32:59: %SYS-5-CONFIG_I: Configured from console by console</description>
        <pattern>%@ESTRING:.cisco.Facility:-@@ESTRING:.cisco.Severity:-@@ANYSTRING:.cisco.MsgName@</pattern>
            <rules>
                <rule xml:id="09944c71-95eb-4bc0-8575-936931d85713" provider="oneidentity" class="system">
                    <patterns>
                        <pattern> @ANYSTRING:.cisco.MsgText@</pattern>
                    </patterns>
                </rule>
            </rules>
    </ruleset>
    <ruleset name="cisco snmp ruleset2" xml:id="480de478-d4a6-4a7f-bea4-0c0245d361e3">
        <description>Pattern for Cisco messages having cisco-specific timestamps, for example: 18: Jan 22 10:45:44.543: %SYS-5-CONFIG_I: Configured from console by console</description>
        <rules>
            <rule xml:id="09944c71-95eb-4bc0-8575-936931d85714" provider="oneidentity" class="system">
                <patterns>
                    <pattern>%@ESTRING:.cisco.Facility:-@@ESTRING:.cisco.Severity:-@@ESTRING:.cisco.MsgName::@ @ANYSTRING:.cisco.MsgText@</pattern>
                </patterns>
            </rule>
        </rules>
    </ruleset>
</patterndb>

Sending clogMessageGenerated SNMP traps

To send out clogMessageGenerated SNMP traps, use the cisco_snmp() destination driver. The cisco-snmp() destination is actually a modified version of the snmp() destination driver.

NOTE: The cisco-snmp() driver is actually a reusable configuration snippet. For details on using or writing SCLs, see Reusing configuration blocks. The cisco-snmp() driver has the same requirements and options as the snmp() destination driver, but automatically fills the clogMessageGenerated-specific fields with the data received from parsing the Cisco-specific syslog messages using the pattern database. For details on the , see the <INSTALLDIR>/ share/include/scl/snmp/plugin.conf file.

Declaration:

destination d_cisco_snmp {cisco-snmp(host(<hostname>));};

Example: Defining a Cisco-specific SNMP destination

The following example defines an SNMP destination that sends out clogMessageGenerated messages using the SNMPv3 protocol.

destination d_cisco_snmp {cisco-snmp(host("192.168.1.1")
version("v3")
engine-id("'0xdeadbeefde'")
auth-username('myusername')
auth-password('password')
enc-password('password'));};

Updated: