The following options are available for the syslog-ng-otlp() source.

auth()

The auth() option can be used to set the authentication of the driver. The default state of this option is insecure, as it is not defined.

The following sub-options are available for auth().

adc()

This option is an authentication method that is only available for destinations. For more information, see Application Default Credentials.

alts()

This option is an accessible authentication available for Google infrastructures. Service accounts can be listed with the nested target-service-account() option, to match these against the server.

Example: configure an syslog-ng-otlp() source using auth(alts())

source {
    syslog-ng-otlp(
      port(4317)
      auth(alts())
    );
  };

insecure()

This option can be used to disable authentication: auth(insecure()).

tls()

The tls() option accepts the following nested sub-options.

Example: configure an syslog-ng-otlp() source using auth(tls())

destination {
    syslog-ng-otlp(
      url("your-otel-server:12346")
      auth(
        tls(
          ca-file("/path/to/ca.pem")
          key-file("/path/to/key.pem")
          cert-file("/path/to/cert.pem")
        )
      )
    );
  };

chain-hostname()

Type: yes, no
Default: no

Description: This option can be used to enable or disable the chained hostname format. For more information, see the chain-hostnames() global option.

channel-args()

Type:  
Default:  

Description: The channel-args() option is available in gRPC-based drivers. The option accepts name-value pairs and sets channel arguments defined in the GRPC Core library documentation.

Example: channel-args() declaration

    channel-args(
        "grpc.loadreporting" => 1
        "grpc.minimal_stack" => 0
    )

concurrent-requests()

Type: integer
Default: 2

Description: This option configures the upper limit of in-flight gRPC requests per worker. It is advisd to set this value in the range of 10s or 100s when there are a high number of clients sending simultaneously. In an optimized solution, the number of workers() and concurrent-requests() is greater than or equal to the number of clients. However, this can cause an increase in memory usage.

default-facility()

Type: facility string
Default: kern

Description: This option assigns a facility value to messages received from the file source if the message does not specify one.

default-level()

Type: string
Default: notice

Description: This option defines the default level value if the PRIORITY entry does not exist.

default-priority()

Type: priority string
Default:  

Description: This parameter assigns an emergency level to the messages received from the file source if the message does not specify one. For example, default-priority(warning).

dns-cache()

Type: yes, no
Default: no

Description: This option enables or disables the DNS cache usage.

ebpf()

Available in syslog-ng OSE 4.2 and later versions.

If this option is not used, the kernel chooses the receive socket for a specific UDP randomly based on the source IP/port of the sender. It is possible to customize this algorithm using the Extended Berkeley Packet Filter (eBPF) plugin. The ebpf() option changes the SO_REUSEPORT algorithm of the kernel, to place messages randomly into one of the UDP sockets. The decision which UDP socket buffer a datagram is placed is made for every datagram, and not once for every stream. This results in the percet load-balancing of messages across the set of UDP sockets. While this resolves the imbalance between the sockets and results in perfect load balancing, the order of messages from the same sender is lost, which is the drawback of increased throughput.

Example: Configure a syslog-ng-otlp() source with ebpf()

source {
      syslog-ng-otlp(
        udp(so-reuseport(yes) port(2000) persist-name("udp1")
          ebpf(reuseport(sockets(4))));
        udp(so-reuseport(yes) port(2000) persist-name("udp2"));
        udp(so-reuseport(yes) port(2000) persist-name("udp3"));
        udp(so-reuseport(yes) port(2000) persist-name("udp4"));
      );
};

flags()

Type: assume-utf8, empty-lines, expect-hostname, kernel, no-hostname, no-multi-line, no-parse, sanitize-utf8, store-legacy-msghdr, store-raw-message, syslog-protocol, validate-utf8
Default: empty set

Description: This option specifies the log parsing option of the source. The following flags are available:

  • assume-utf8: This flag expects UTF-8 encoded incoming messages, but does not verify the encoding. If the UTF-8 encoding of the incoming message must be validated, use the validate-utf8 flag.
  • empty-lines: Use the empty-lines flag to keep the empty lines of the messages. Otherwise, these lines are automatically removed.
  • expect-hostname: When this flag is used syslog-ng OSE expects a log message that contains a hostname and parses the message accordingly. This is the default behavior for TCP sources. Note that pipe sources use the no-hostname flag by default.
  • guess-timezone: This flag allows the source to attempt to guess the timezone of the message if this information is not available in the message. Works when the incoming message stream is close to real time, and the timezone information is missing from the timestamp.
  • kernel: This flag sets the source default to the LOG_KERN | LOG_NOTICE priority if not specified otherwise.
  • no-header: This flag triggers syslog-ng OSE to parse only the PRI field of incoming messages, and put the rest of the message contents into MSG. The functionality of no-header is similar to the no-parse flag, but the no-header flag does not skip the PRI field. The no-header flag signals syslog-ng OSE that the syslog header is not present (or does not adhere to the conventions / RFCs), so the entire message (except from the PRI field) is put into MSG.
    parser p_syslog {
      syslog-parser(
        flags(no-header)
      );
    };
  • no-hostname: Enable this flag if the log message does not include the hostname of the sender host. This results in syslog-ng OSE assuming that the first part of the message header is PROGRAM instead of HOST. 
      source s_dell {
      network(
          port(2000)
          flags(no-hostname)
      );
  };
  • no-multi-line: This flag disables line-breaking in the messages and converts the entire message into a single line. Note that this happens only if the underlying transport method supports multi-line messages. Currently only the file() and pipe() drivers support multi-line messages.
  • no-parse: By default, syslog-ng OSE parses incoming messages as syslog messages. The no-parse flag disables syslog message parsing and processes the complete line as the message part of a syslog message. The syslog-ng OSE application generates a new syslog header (timestamp, host, and so on) automatically and puts the entire incoming message into the MESSAGE part of the syslog message (available using the ${MESSAGE} macro). This flag is useful for parsing messages that do not complying to the syslog format.
  • dont-store-legacy-msghdr: During default operation, syslog-ng OSE stores the original incoming header of the log message. This is useful if the original format of a non-syslog-compliant message must be retained. The syslog-ng OSE application automatically corrects minor header errors, for example, it adds a whitespace before “msg” in the following message: Jan 22 10:06:11 host program:msg. If storage of the original header of the message is not needed, enable the dont-store-legacy-msghdr flag.
  • sanitize-utf8: When this flag is used, syslog-ng OSE converts non-UTF-8 input to an escaped format, adhering to UTF-8. Prior to version 4.6, this only worked with parsing RFC3164 messages. In syslog-ng OSE 4.6 and later versions, RFC5424 and raw messages can also be parsed using this flag.
  • store-raw-message: This flag saves the original message as received from the client in the ${RAWMSG} macro. This raw message can be forwarded in its original form to another syslog-ng OSE node using the syslog-ng() destination, or to a SIEM system, making sure that the SIEM can process it. This flag is available in syslog-ng OSE 3.16 and later versions.
  • syslog-protocol: This flag specifies that incoming messages are expected to be formatted according to the new IETF syslog protocol standard (RFC5424), but without the frame header. Note that this flag is not needed for the syslog driver, which handles only messages that have a frame header.
  • validate-utf8: This flag enables encoding-verification for messages. Prior to version 4.6, this only worked with parsing RFC3164 messages. In syslog-ng OSE 4.6 and later versions, RFC5424 and raw messages can also be parsed using this flag. In the case of RFC5424 formatted messages, if the byte order mark (BOM) character is missing, but the message is otherwise UTF-8 compliant, syslog-ng OSE automatically adds the BOM character to the message.

host-override()

Type: string
Default:  

Description: Replaces the HOST part of the message with the parameter string.

keep-hostname()

Type: yes or no
Default: no

Description: Enable or disable hostname rewriting.

NOTE: If the log message does not contain a hostname in its HOST field, syslog-ng OSE automatically adds a hostname to the message.

  • For messages received from the network, this hostname is the address of the host that sent the message (this means the address of the last hop if the message was transferred via a relay).

  • For messages received from the local host, syslog-ng OSE adds the name of the host.

This option can be specified globally, and per-source as well. The local setting of the source overrides the global option if available.

NOTE: When relaying messages, enable this option on the syslog-ng OSE server and also on every relay, otherwise syslog-ng OSE will treat incoming messages as if they were sent by the last relay.

keep-timestamp()

Accepted values: yes | no
Default: yes

Description: Specifies whether syslog-ng OSE should accept the timestamp received from the sending application or client. If disabled, the time of reception will be used instead. This option can be specified globally, and per-source as well. The local setting of the source overrides the global option if available.

CAUTION: To use the S_ macros, the keep-timestamp() option must be enabled (this is the default behavior of syslog-ng OSE).

log-fetch-limit()

Type: number
Default: 100

Description: The maximum number of messages fetched from a source during a single poll loop. The destination queues might fill up before flow-control could stop reading if log-fetch-limit() is too high.

log-iw-size()

Type: number
Default:  

Description: The size of the initial window, this value is used during flow-control. Its value cannot be lower than 100, unless the dynamic-window-size() option is enabled. For details on flow-control, see Managing incoming and outgoing messages with flow-control.

log-prefix() (DEPRECATED)

Type: string
Default:  

Description: A string added to the beginning of every log message. It can be used to add an arbitrary string to any log source, though it is most commonly used for adding kernel: to the kernel messages on Linux.

NOTE: This option is deprecated. Use program-override instead.

normalize-hostnames()

Type: yes, no
Default: no

Description: If this option is set to yes (normalize-hostnames(yes)), syslog-ng OSE converts the hostnames to lowercase. This setting only applies to hostnames resolved from DNS. It has no effect if the keep-hostname() option is enabled, and the message contains a hostname.

persist-name()

Type: string
Default: N/A

Description: If you receive the following error message during syslog-ng OSE startup, set the persist-name() option of the duplicate drivers:

Error checking the uniqueness of the persist names, please override it with persist-name option. Shutting down.

This error happens if you use identical drivers in multiple sources, for example, if you configure two file sources to read from the same file. In this case, set the persist-name() of the drivers to a custom string, for example, persist-name(“example-persist-name1”).

port()

Type: number
Default:  

Description: The port number of the .

program-override()

Type: string
Default:  

Description: Replaces the ${PROGRAM} part of the message with the parameter string. For example, to mark every message coming from the kernel, include the program-override("kernel") option in the source containing /proc/kmsg.

tags()

Type: string
Default:  

Description: Label the messages received from the source with custom tags. Tags must be unique, and enclosed between double quotes. When adding multiple tags, separate them with comma, for example, tags(“dmz”, “router”). This option is available only in syslog-ng OSE 3.1 and later.

time-zone()

Type: name of the timezone, or the timezone offset
Default:  

Description: The default timezone for messages read from the source. Applies only if no timezone is specified within the message itself.

The timezone can be specified by using the name, for example, time-zone(“Europe/Budapest”)), or as the timezone offset in +/-HH:MM format, for example, +01:00). On Linux and UNIX platforms, the valid timezone names are listed under the /usr/share/zoneinfo directory.

time-reopen()

Accepted values: number [seconds]
Default: 60

Description: The time to wait in seconds before a dead connection is reestablished.

use-dns()

Accepted values: yes, no, persist_only
Default: yes

Description: Enable or disable DNS usage. The persist_only option attempts to resolve hostnames locally from file (for example, from /etc/hosts). The syslog-ng OSE application blocks on DNS queries, so enabling DNS may lead to a Denial of Service attack. To prevent DoS, protect your syslog-ng OSE network endpoint with firewall rules, and make sure that all hosts which may get to syslog-ng OSE are resolvable. This option can be specified globally, and per-source as well. The local setting of the source overrides the global option if available.

NOTE: This option has no effect if the keep-hostname() option is enabled (keep-hostname(yes)) and the message contains a hostname.

use-fqdn()

Accepted values: yes | no
Default: no

Description: Use this option to add a Fully Qualified Domain Name (FQDN) instead of a short hostname. You can specify this option either globally or per-source. The local setting of the source overrides the global option if available.

TIP: Set use-fqdn() to yes if you want to use the custom-domain() global option.

NOTE: This option has no effect if the keep-hostname() option is enabled (keep-hostname(yes)) and the message contains a hostname.

workers()

Type: integer
Default: 1

Description: Specifies the number of worker threads (at least 1) that syslog-ng OSE uses to send messages to the server. Increasing the number of worker threads can drastically improve the performance of the destination.

CAUTION: Hazard of data loss! When you use more than one worker threads together with disk-based buffering, syslog-ng OSE creates a separate disk buffer for each worker thread. This means that decreasing the number of workers can result in losing data currently stored in the disk buffer files. Do not decrease the number of workers when the disk buffer files are in use.

If you are using load-balancing (that is, you have configured multiple servers in the url() option), increase the number of worker threads at least to the number of servers. For example, if you have set three URLs (url(“site1”, “site2”, “site3”)), set the workers() option to 3 or more.

Updated: